Rappresentate Fiscale Autorizzato:
The new iSmoka Eleaf’s iJust Start Plus kit of a simple design has battery capacity of 1300 mah and liquid capacity of 2.3 ml. It’s easy to use and also fit for who is making first steps in the world of vaping. - Air inflow control. – Side charging port. – Material: Stainless steel and glass.
Warning: Last items in stock!
Material: Stainless steel + glass
Resistance: 0.75 ohm
Resistance range: 0.4ohm-3.5ohm
Coil Replaceable: Yes
Coil Rebuildable: No
Battery Capacity: 1300 mAh
eLiquid Capacity: 2.3 ml
Connection Threading: 510
Size: 16.5 mm x 141.3 mm
Compatible with heads: Pure cotton (1.2 ohm and 0.75 ohm); GS Air (1.5 0hm)
Battery type: non-removable
Compatible with: Eleaf GS Air 2 and all the atomizers with the 16.5mm diameter.
Atomizer protection: When vaping time exceeds 15 seconds, the device shuts down automatically.
No atomizer protection: The white button light will flash when the button is pressed down without atomizer connected.
Short circuit protection
Low voltage protection
Battery Level Indication Function
E-juice filling: Unscrew the atomizer base, tilt the tank and keep the filling hole upwards. Start filling with juice along the tube. Then screw the atomizer head back in. Make sure that it fits perfectly.
Charging: iJust start can be charged through USB port on the side of battery. The button light will turn red when the device is charging and the light will go off when fully charged.
It takes 4 hours to get a full charge via 1A wall adapter.
Coil replacement: Unscrew atomizer base and then unscrew the coil attached to it. Screw in the new coil. It’s recommended to drip a few drops of e-juice onto the coil to avoid the dry burn.
1 x GS Air 2 (16.5 mm) Clearomizer
1 x 1300 mAh Battery
2 x GS Air (0.75ohm) Coil Heads
1 X Silicone Airflow control Ring
1 x USB Cable
1 x User Manual